Satellite profiles and modem profiles
6-26 Chapter 6: Configuration 98-148248-C
The following figure shows a populated map.
6.5.4 To configure the LAN network
On this page you can enter a host name. The host name helps identifying the SAILOR 600
VSAT Ka system when sending e-mail reports and remotely connecting through an external
Internet connection. The ACU has four 10/100 Mbit/s Ethernet ports labeled LAN port 1, 2,
3 and 4. The ports are divided in three groups, each group operating in its own network. You
can set up DNS and Gateway.
To configure the LAN network go to SETTINGS > Network.
Figure 6-21: Blocking zone and blocking map (example)
The SAILOR 600 VSAT Ka system is not designed to be connected directly to
the Internet. It must be located behind a dedicated network security device
such as a fire wall.
If any ports of the SAILOR 600 VSAT Ka are exposed to the Internet you
must change the default passwords as anyone with access and malicious
intent can render the SAILOR 600 VSAT Ka inoperable.
To Next Page
Loading...
Need help?
General