What’s in the box
3-2 Chapter 3: Installation 98-148248-C
After unpacking the system, i.e. opening the cartons, inspect it thoroughly for hidden
damage and loose components or fittings. If the contents are incomplete, if there is
mechanical damage or defect, or if the system does not work properly, notify your dealer.
3.1.3 Tools needed
• Torque wrench to fasten the mounting bolts for the ADU
• Torque wrench to fasten the N connector at the ADU
• PC and Internet browser
•Crimping tools
3.1.4 Transport of the antenna
During transport the antenna must be able to move freely inside the radome. You must
follow the instructions below to keep a valid warranty:
WARNING! To avoid electric shock, do not apply power to the system if
there is any sign of shipping damage to any part of the front or rear panel or
the outer cover. Read the safety summary at the front of this manual before
installing or operating the system.
CAUTION!
Do not strap parts of the antenna.
This might cause damage to the antenna.
Damage due to actions listed above will void the warranty.
To Next Page
Loading...
Need help?
General