Calibration
98-148248-C Chapter 6: Configuration 6-13
6666
To make a manual OTC for the modem, do as follows:
1. Connect a PC to LAN1.
2. Enter the web interface (via Firefox browser) and go to SERVICE > Modem.
3. At Modem access click the link.
4. Type the user name admin (default) and the password iDirect (default).
5. In the menu Commissioning click One Touch Commissioning.
WARNING! For your safety: Active RF transmission may occur during an
OTC procedure. Software updates may also occur, yet the system is in receive-
only mode during such auto-updates.
You must use the Internet browser Firefox.
Figure 6-9: Web interface: SERVICE > Modem, for GX modem
Figure 6-10: Unified web interface of the Core Module
To Next Page
Loading...
Need help?
General