Cognex VisionView - Regulations and Conformity; Declaration of Conformity; Safety and Regulatory

iii
Regulations/Conformity
Declaration of Conformity
Manufacturer: Cognex Corporation
One Vision Drive
Natick, MA 01760 USA
Declares this -marked Machine Vision System Product
Product Type: Type 821-0004-1R
Complies With: 2004/108/EC Electromagnetic Compatibility Directive
Compliance Standards: EN 55022:2006 Class A
EN 61000-6-2:2005
European Representative: COGNEX INTERNATIONAL
Immeuble “Le Patio”
104 Avenue Albert 1er
92563 Rueil Malmaison Cedex - France
Safety and Regulatory
FCC FCC Part 15, Class A
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the interference at their own expense.
NRTL TUV SUD AM SCC/NRTL OSHA Scheme for UL/CAN 60950-1
CB TUV SUD AM, IEC/EN 60950-1. CB report available upon request.
RoHS RoHS 6 Compliant
Note:
For the most up-to-date regulations and conformity information, please refer to the Cognex online support site:
http://www.cognex.com/Support/VisionView.
StockCheck.com