42
EditFloat
Pressing an EditFloat control switches the display to Numeric Entry Mode, where a floating-point numeric value can be entered by using the
numeric keypad or by pressing the up or down button.
EditInt
Pressing an EditInt control switches the display to Numeric Entry Mode, where a numeric value can be entered by using the numeric keypad or
by pressing the up or down button.
EditLine
Pressing an EditLine control switches the display to Interactive Graphics Mode, where the position and size of the line can be adjusted.
EditPoint
Pressing an EditPoint control switches the display to Interactive Graphics Mode, where the position of the point can be adjusted.
EditPolygon
Pressing an EditPolygon control switches the display to Interactive Graphics Mode, where the position and size of the polygon can be adjusted.
EditRegion
Pressing an EditRegion control switches the display to Interactive Graphics Mode, where the position, size, rotation and bend of the region can
be adjusted.
EditString
Pressing an EditString control allows the operator to enter an alphanumeric text string.
Note:
Individual points in the polygon cannot be added or removed from VisionView.
To Next Page
Loading...
