53
Appendix A
Cleaning/Maintenance
Use a micro-fiber cleaning cloth to quickly remove smudges and fingerprints from VisionView. Be sure to first remove large dirt particles with
clean, compressed air, a camel hair brush or brush the surface lightly with the cloth.
Use alcohol (ethyl, methyl or isopropyl) to remove stubborn residue from the touch screen surface. Do not pour alcohol directly on the screen
surface, but apply to the cloth first; if alcohol soaks into the joint of upper film and bottom glass, peeling and defective operation may occur.
Wipe dry with a clean/dry section of the cloth.
Notes:
• Attempting to clean the touch screen with a sharp object, such as a fingernail, may cause transparent conductive cracks in the touch screen.
• Do not attempt to clean VisionView using glass cleaner, manicure remover (toluene), benzine or other organic solvents or cleaners.
To Next Page
Loading...
