Colortrac M25e - Page 65

M Series Service Manual
Page 65 of 129
7. Remove the 2 x M3 screws
from the left end of the
SingleSensor CIS Assy.
8. Remove the 2 x M3 screws
from the right end of the
SingleSensor CIS Assy.
NOTE: With your free hand, hold the
SingleSensor CIS Assy in place to prevent it
dropping and being damaged.
9. Use the small screw to gently
push the SingleSensor CIS
Assy from the Lid Assembly.
10. Gently remove the
SingleSensor CIS Assy from
the Lid Assembly.