InteliLite 9 Global Guide
228
Setpoint group
CM-GPRS; CM-4G-
GPS; CM-Ethernet
Related FW 1.1.0
Range [units] [-]
Default value English Alternative config NO
Step [-]
Comm object 24299 Related applications AMF, MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
Use this setpoint to set the language of SMS and e-mail.
Note: Numbers correspond with languages in language list. See the chapter for Language selection
(page 73) more information.
This setpoint is common for CM-Ethernet, CM-GPRS and CM-4G-GPS modules.
Message Language
6 back to List of setpoints
Setpoint group
CM-GPRS; CM-4G-
GPS; CM-Ethernet
Related FW 1.1.0
Range [units] GMT-12:00 .. GMT+13:00 [hours]
Default value GMT+1:00 hour Alternative config NO
Step [-]
Comm object 24366 Related applications AMF, MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
This setpoint is used to select the time zone where the controller is located. See your computer time zone
setting (click on the time indicator located in the rightmost position of the Windows task bar) if you are not
sure about your time zone.
Note: If the time zone is not selected properly the active e-mails may contain incorrect information about
sending time, which may result in confusion when the respective problem actually occurred.
Note: This setpoint is common for CM-Ethernet, CM-GPRS and CM-4G-GPS modules.
Time Zone
6 back to List of setpoints
To Next Page
Loading...
Need help?
General
