InteliLite 9 Global Guide
320
Related FW 1.1.0 Related applications AMF, MRS
Comm object 1422
Description
The output is closed when there is the warning alarm from the FUEL LEVEL (PAGE 354) in the alarmlist or isn’t
confirmed.
Note: Binary output is also active if protection type is set to HistRecOnl and threshold level for history
record is reach.
AL Fuel Level Wrn
6 back to Logical binary outputs alphabetically
Related FW 1.1.0 Related applications AMF
Comm object 197
Description
Output for signaling Mains Failure. This output is active when at least one mains frequency BOC or Sd alarm
or at least one mains voltage BOC or Sd alarm is present in alarmlist or isn’t confirmed.
AL Mains Fail
6 back to Logical binary outputs alphabetically
Related FW 1.1.0 Related applications AMF, MRS
Comm object 1254
Description
This output is active when the Alarm Maintenance 1 is present in the alarmlist. It means that counter of
maintenance is on zero or the Alarm Maintenance 1 isn’t confirm.
AL Maintenance 1
6 back to Logical binary outputs alphabetically
Related FW 1.1.0 Related applications AMF, MRS
Comm object 1255
Description
This output is active when the Alarm Maintenance 2 is present in the alarmlist. It means that counter of
maintenance is on zero or the Alarm Maintenance 2 isn’t confirm.
AL Maintenance 2
6 back to Logical binary outputs alphabetically
Related FW 1.1.0 Related applications AMF, MRS
Comm object 1256
Description
This output is active when the Alarm Maintenance 3 is present in the alarmlist. It means that counter of
maintenance is on zero or the Alarm Maintenance 3 isn’t confirm.
AL Maintenance 3
6 back to Logical binary outputs alphabetically
To Next Page
Loading...
Need help?
General
