InteliLite 9 Global Guide
221
Setpoint group Scheduler Related FW 1.1.0
Range [units] 1 .. 5 [week]
Default value 1 week Alternative config NO
Step 1 week
Comm object 0 Related applications AMF, MRS
Config level Standard
Setpoint visibility
Conditioned by the setpoint Timer 1 Function (page 214)
Description
This setpoint adjust the week of month in which the Timer 1 Function (page 214) will be activated.
Timer 1 Repeat Week In Month
6 back to List of setpoints
Group: Plug-In Modules
Setpoint group Plug-In Modules Related FW 1.1.0
Range [units] ENABLED / DISABLED [-]
Default value ENABLED Alternative config NO
Step [-]
Comm object 24280 Related applications AMF, MRS
Config level Standard
Setpoint visibility Always
Description
This setpoint enable or disable module in slot A.
Slot A
6 back to List of setpoints
Group: CM-RS232-485
Setpoint group CM-RS232-485 Related FW 1.1.0
Range [units] Direct / MODBUS [-]
Default value Direct Alternative config NO
Step [-]
Comm object 24522 Related applications AMF, MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
Communication protocol switch for the COM1 channel.
Direct InteliConfig communication protocol via serial cable.
MODBUS MODBUS protocol.
COM1 Mode
6 back to List of setpoints
To Next Page
Loading...
Need help?
General
