ComAp InteliLite 9 - Load Characteristic L1; Load Characteristic L2; Load Characteristic L3; Load Kva

InteliLite 9 Global Guide
269
Value group Load Related FW 1.1.0
Units [-]
Comm object 8626 Related applications AMF, MRS
Description
Character of the generator load in the L1 phase. “L” means inductive load, “C” is capacitive and “R” is
resistive load (power factor = 1).
Load Characteristic L1
6 back to List of values
Value group Load Related FW 1.1.0
Units [-]
Comm object 8627 Related applications AMF, MRS
Description
Character of the generator load in the L2 phase. “L” means inductive load, “C” is capacitive and “R” is
resistive load (power factor = 1).
Load Characteristic L2
6 back to List of values
Value group Load Related FW 1.1.0
Units [-]
Comm object 8628 Related applications AMF, MRS
Description
Character of the generator load in the L3 phase. “L” means inductive load, “C” is capacitive and “R” is
resistive load (power factor = 1).
Load Characteristic L3
6 back to List of values
Value group Load Related FW 1.1.0
Units kVA
Comm object 8565 Related applications AMF, MRS
Description
Load apparent power.
Note: This value can be also switch into one decimal power format (via InteliConfig PC tool). In this
case the range of value is decrease 10 times.
Load kVA
6 back to List of values