EasyManua.ls Logo

ComAp InteliLite 9 - Cell Diag Code

ComAp InteliLite 9
401 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
InteliLite 9 Global Guide
284
Group: CM-GPRS
Value group
CM-GPRS; CM-4G-
GPS (4G part)
Related FW 1.1.0
Units [-]
Comm object 24146 Related applications AMF, MRS
Description
The type of data connection.
Connection Type
6 back to List of values
Value group
CM-GPRS; CM-4G-
GPS (4G part)
Related FW 1.1.0
Units [-]
Comm object 24288 Related applications AMF, MRS
Description
Diagnostic code for the CM-GPRS or CM-4G-GPS module.
Code Description
0 OK. No error.
1 Not possible to hang up.
2 Modul is switched off
3 Module is switched on
4 Module error in initialization
5 Module not possible to set the APN
6 Module not possible to connect to GPRS network
7 Module not possible to retrieve IP address
8 Module not accepted DNS IP address
9 Error in modem detection
10 Error in initialization of analog modem
11
SIM card is locked (Possibly PIN code required, PIN needs to be deactivated) or
unknown status of SIM locking
12 No GSM signal
13 Not possible to read the SIM card parameters
14
GSM modem did not accepted particular initialization command, possibly caused by
locked SIM card
15 Unknown modem
16 Bad answer to complement initialization string
17 Not possible to read GSM signal strength
GSM Diag Code Common list of diagnostic codes for cellular modules
Cell Diag Code

Table of Contents

Related product manuals