InteliLite 9 Global Guide
230
Setpoint group
CM-GPRS; CM-4G-
GPS; CM-Ethernet
Related FW 1.1.0
Range [units] ON / OFF [-]
Default value ON Alternative config NO
Step [-]
Comm object 8484 Related applications AMF, MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
This setpoint enables or disables Sd Messages.
This setpoint is common for CM-Ethernet, CM-GPRS and CM-4G-GPS modules.
Sd Messages
6 back to List of setpoints
Setpoint group
CM-GPRS; CM-4G-
GPS
Related FW 1.1.0
Range [units] 0..31 characters [-]
Default value [-] Alternative config NO
Step [-]
Comm object 24296 Related applications AMF, MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
Enter in this setpoint either a valid GSM phone number where the alarm messages shall be sent. For GSM
numbers use either the national format (i.e. the number you would dial if you wanted to make a local call) or
the full international format beginning with a “+” character followed by the country prefix.
IMPORTANT: Telephone number has to be entered without spaces.
Telephone Number 1
6 back to List of setpoints
To Next Page
Loading...
Need help?
General
