InteliLite 9 Global Guide
304
Logical binary input CHOKE INHIBIT prevent Choke functionality when logical binary output CHOKE (PAGE
322) is activated. If CHOKE INHIBIT is activated when CHOKE LBO is active, CHOKE LBO is deactivated
immediately and vice versa if LBI CHOKE INHIBIT is deactivated and LBO CHOKE should be active then is
activated.
6 back to Logical binary inputs alphabetically
LBI: D
Related FW 1.1.0 Related applications AMF, MRS
Comm object 930
Description
This binary input activates function of dark mode. It means that backlight of display is turn of (information on
controller screens are not affected) and LEDs (Mains, Generator, Load, Breakers, etc.) are turn off (LEDs
don’t react on normal condition of their activation and deactivation).
Note: After deactivation of dark mode, backlight of display is turned on and than behaves normally.
Note: After deactivation of dark mode, Front Face status LEDs are turned on due to current situation of
gen-set.
Dark Mode
6 back to Logical binary inputs alphabetically
To Next Page
Loading...
Need help?
General
