InteliLite 9 Global Guide
366
Alarm Type Warning
Alarmlist message Wrn Maintenance 2
Alarm evaluated All the time
Related applications AMF, MRS
Description
Adjust the setpoint Maintenance Timer 2 (page 187) to the interval of the next
maintenance check. The value of the setpoint will count down while the engine is
running and if reaches zero, this alarm will be issued. The alarm message will
remain in the alarm list (even if the controller is switched off and on again) until the
setpoint is re-adjusted to a positive value.
Wrn Maintenance 2
6 back to List of alarms level 1
Alarm Type Warning
Alarmlist message Wrn Maintenance 3
Alarm evaluated All the time
Related applications AMF, MRS
Description
Adjust the setpoint Maintenance Timer 3 (page 188) to the interval of the next
maintenance check. The value of the setpoint will count down while the engine is
running and if reaches zero, this alarm will be issued. The alarm message will
remain in the alarm list (even if the controller is switched off and on again) until the
setpoint is re-adjusted to a positive value.
Wrn Maintenance 3
6 back to List of alarms level 1
Alarm Type Warning
Alarmlist message Wrn MCB Fail
Alarm evaluated All the time
Wrn MCB Fail
To Next Page
Loading...
Need help?
General
