ComAp InteliLite 9 User Manual

InteliLite 9 Global Guide
60
Note: Use Up and
Down button to
select required
setpoint group.
Note: Use Enter button to enter selected setpoint group.
Note: Use Left and Right button to select required setpoint.
Note: Use Enter button to enter selected setpoint.
Note: Use Up and
Down button to set
required value of
selected setpoint.
Note: Use Enter button to confirm adjusted value of setpoint.
Note: Use Page button to discard changes, to set setpoint to previous value and to return to the list of
setpoints of selected group.
IMPORTANT: Cannot change setpoint? Setpoints marked with an padlock are password protected.
Enter password as described in the chapter Password (page 66).

ComAp InteliLite 9 Specifications

General

Brand	ComAp
Model	InteliLite 9
Category	Controller
Language	English