Commonwealth Albert - Customising Albert Settings; Display and Sound Customisation; Setting Up Communications and Email

Commonwealth Bank Albert User Guide 13
3. Customising Albert.
Every business is dierent. That’s why Albert lets you adapt your
device to work best for you.
Note Dierent options may be available, depending on whether you use a
Manager or Operator password to access Seings.
Choosing display features.
Brightness 1. To change the screen brightness, tap the Seings app, then
Device Seings, then Display,
2. Tap Brightness level. The slide bar will appear at the top of
thescreen.
3. Slide the bar to the le or right as required.
Tip In the Display screen you can also turn on Adaptive Brightness,
which will automatically adjust the brightness level to suit the
available lighting.
Customising sounds.
Volume 1. To change the volume of alerts and other sounds, tap the
Seings app, then Device Seings, then Sound to open the
Sound and Notification screen.
2. Slide the volume bars to the le or right as required.
Touch sounds 1. Choose if you want Albert to make a sound when someone
touches the screen.
2. Tap Other Sounds in the Sound and Notification screen.
3. Slide the Touch Sounds bar to the right to turn them on.
Seing up communications.
When no Wi-Fi is available or selected, Albert will automatically use the inbuilt 3G Telstra service.
Wi-Fi • Tap the Seings app, then Communications then Wi-Fi.
• To turn Wi-Fi on, slide the buon on the Status Bar from O to On.
Choose your Wi-Fi network from the list and enter the password.
• To turn Wi-Fi o, slide the tab on the Status Bar on the Wi-Fi seings
screen from On to O. The Wi-Fi symbol will be displayed in the
Information bar when you have established a connection.