Commonwealth Albert - Managing Passwords

14 Commonwealth Bank Albert User Guide
Seing up communications.
Note To connect via Wi-Fi, the network you are connecting to must have the
following minimum level of security: WPA-PSK (AES), WPA2-PSK (AES)
or mixed WPA2/WPA-PSK (AES). If the selected Wi-Fi network does
not have the required security level, the following message will appear:
‘Selected Wi-Fi network does not have enough security. Please select
a Wi-Fi network with at least WPA2-PSK’.
Tip Albert can connect via Wi-Fi or 3G. Although you can choose to use
Albert in either mode, we recommend Wi-Fi as the default seing,
with 3G as a backup. This will provide faster access for transactions
and apps on the device, and a backup if there are connectivity issues.
Connecting an email account.
Outgoing email
account
1. Tap the Seings app, then Device Seings, then Email. To add
an existing email account, tap the input field to enter the email
address and password.
2. Tap OK.
Manual setup The Manual tab is for advanced seings only, and is not needed for
general use.
Changing passwords.
• You must log in with your Manager password to change either the Manager or Operator
password.
• Tap the Seings app, then Device Seings, then Change Passwords.
• Enter your Manager password and tap OK.
Manager password 1. Tap Change Manager Password. Enter a new six-digit password.
2. Once you have completed the sixth digit you will be asked to re-
enter the password.
Operator password 1. Tap Change Operator Password. Enter a new six-digit password.
2. Once you have completed the sixth digit you will be asked to re-
enter the password.
Tip If sta members use the Albert terminal, we recommend that you
use your Manager password to manage the seings and establish an
Operator password that sta members can use to process payments.
This provides added security to your seings, including transaction
limits.