GEN1000 Operator Manual
2 July 22, 2019 | 287960-ENG | R00
The ″DO NOT DISCONNECT UNDER LOAD″ symbol is used to remind the user to
shut off the power to the receptacle before removing the plug.
The ″READ THE OPERATOR MANUAL″ label is intended to remind the
user to have a thorough understanding of the equipment BEFORE use.
1.2 General Precautions
These precautions should be read and understood before proceeding with installation,
operation, and maintenance.
Conduct a visual inspection of the equipment and surrounding area by walking
around the unit to ensure no debris or obstacles are present that could pose a safety
hazard before operating the chamber.
Operate your Conviron equipment for a minimum of five days before introducing any
research material to ensure proper and stable operation.
Avoid direct contact with any broken fluorescent lamps. Fluorescent lamps are
extremely fragile and may emit harmful vapors when broken.
Follow all applicable local environmental regulations and guidelines for disposal of
hazardous material. If in doubt, contact local authorities for proper disposal
procedures.
Warning: Electricity hazard
Serious personal injury or death could result from contact with live electrical circuits.
Tool accessible areas are for qualified service people only.
Disconnect power before accessing.
Warning: Hot surface hazards
Personal injury could result from contacting hot surfaces within the chamber.
The user accessible fluorescent lamps, the inaccessible refrigeration system
components, and the inaccessible heater element become hot during normal
operation. Do not touch.
Warning: Read and understand the product manuals before
moving, installing, operating, or servicing this equipment.
Failure to follow these instructions could result in equipment
damage, serious personal injury, or death.
The manual contains safety information that must be understood
and followed before working with the product.
To Next Page
Loading...
