Installation
July 22, 2019 | 287960-ENG | R00 25
Figure 3-30 Slotted Cover Plates
3. Install an air shelf.
Starting at the bottom, place the bottom-rear lip into the slats in the cover plate.
Line up the holes by shifting the shelf left/right as needed.
Hold the shelf level and place the left and right brackets into the appropriate
slots in the pilaster.
Using a ratchet, and working from underneath the shelf, fasten the brackets to
the shelf.
Figure 3-31 Air Shelf Bracket
4. Secure the air shelf to the cover plate.
5. Install wire shelf clips into the pilaster using the notch immediately above the air shelf.
6. Secure a wire shelf on top of the wire shelf clips. Be careful not to scratch the white
finish.
To Next Page
Loading...
