Conviron GEN1000 - POST START-UP CHECKS; Visual Checks

GEN1000 Operator Manual
36 July 22, 2019 | 287960-ENG | R00
4.2 Visual Checks
1. Confirm that all lights function when turned on and that the doors are light-tight.
2. Inspect the doors with interior lights on, in a darkened room.
Refer to the Conviron Chambers Maintenance & Troubleshooting Manual for more information.
Operate your Conviron equipment for a few days before introducing any plant
material. This acquaints you with the equipment’s operation and ensures the
equipment meets the requirements for your experiments.