July 22, 2019 | 287960-ENG | R00 45
6 MAINTENANCE
The GEN1000 chamber requires regular maintenance in order to continue performing to
specifications.
Warning: Read and understand the product manuals before moving,
installing, operating, or servicing this equipment.
Failure to follow these instructions could result in equipment damage,
serious personal injury, or death.
The manual contains safety information that must be understood and
followed before working with the product.
Warning: Electrical shock hazard during maintenance or service.
Serious personal injury or death could result from contacting live electrical circuits.
Turn the power to the chamber OFF at the mains panel before performing
maintenance or service on this chamber.
1
Warning: Rotating blade hazard
Opening the access panel results in exposure to rotating fan blades. Serious
personal injury could result from contact with the rotating fan blades.
Remove power from the chamber before servicing. Do not perform maintenance
within the machine compartment with the power connected. The condenser fans on
air-cooled units have exposed fan blades which are a hazard when the top cover of
the machine compartment is open and power is connected.
Only qualified trades or facility personnel, who have read and completely understand
these instructions, should perform the required installation work following acceptable
safety standards.
Contact the responsible party, or Conviron, immediately if in doubt about safe
operation and/or maintenance of the equipment.
Conviron recommends that two technicians be present during maintenance activities.
Warning: Potential hand injury
The machine compartment, which is not user accessible, may include a fan without a
guard. Contact with the sharp edges of the fan could result in lacerations.
Do not contact the sharp edges of the fan compartment.
To Next Page
Loading...
