Conviron GEN1000 - Page 7

July 22, 2019 | 287960-ENG | R00 v
3.7.1 Remove a Wire Shelf ................................................................................................... 32
3.7.2 Remove a Wire Shelf Clip ............................................................................................ 32
3.7.3 Remove an Air Shelf .................................................................................................... 32
3.7.4 Remove an Air Shelf Bracket ....................................................................................... 33
3.7.5 Remove the Unifloor .................................................................................................... 33
3.7.6 Remove a Cover Plate ................................................................................................. 33
3.8 Connect the UPS, Communication, and Central Alarm Contacts ............................................... 33
3.9 Connect the Electrical Cord ......................................................................................................... 34
4 START UP ............................................................................................................................................ 35
4.1 Power ON .................................................................................................................................... 35
4.1.1 Start-Up Procedure ...................................................................................................... 35
4.2 Visual Checks .............................................................................................................................. 36
5 OPERATION ........................................................................................................................................ 37
5.1 Control and Monitoring ................................................................................................................ 37
5.2 Fluorescent and LED Lighting ..................................................................................................... 37
5.3 Lighting Options ........................................................................................................................... 38
5.3.1 Fluorescent Lighting .................................................................................................... 38
5.3.2 LED Lighting – LED Option .......................................................................................... 38
5.3.3 Closed Loop Dimmable Lighting System ..................................................................... 38
5.4 Aspirator ...................................................................................................................................... 39
5.5 Instrumentation Port .................................................................................................................... 39
5.6 Fresh Air Inlet and Exhaust Ports ................................................................................................ 40
5.7 Fan Speed Control ...................................................................................................................... 41
5.8 Plant Placement .......................................................................................................................... 41
5.9 Bypass Dehumidification – BDH Option ...................................................................................... 41
5.10 Additive Carbon Dioxide Control – CO
2
Option ........................................................................... 42
5.10.1 Set up the Additive CO
2
Control .................................................................................. 42
5.10.2 Adjust the CO
2
Control ................................................................................................. 42
5.11 Central Management System – CMS Option .............................................................................. 43
5.12 Shutdown ..................................................................................................................................... 43
6 MAINTENANCE ................................................................................................................................... 45
6.1 Disconnect the Power Before Maintaining or Servicing the Chamber ........................................ 46
6.2 Clean the Chamber ..................................................................................................................... 46
6.3 Replace Fluorescent or LED Lamps ........................................................................................... 46
6.4 Perform Maintenance in the Machine Compartment ................................................................... 48