Coolmay C600S - Page 100

Chapter 7 Parameters
94
F4-37
The speed
setting of
origin regress
in the first
stage of high
speed(HSPD2)
To set the speed of origin regression in the second
stage of high speed.
1-500
r/min
50
F4-38
The cycle
number of
origin
regression
offset(HOF1)
To set the cycle number of origin regression offset.
-30000-
30000
0
F4-39
The pulse
number of
origin
regression
offset(HOF2)
1: To set the pulse number of origin regression offset.
2: When the parameter function HOF1 and HOF2 are
set to 0, the origin is defined as Z pulse or ORGP by the
origin regression mode. If they are not 0, the origin will
define the above Z pulse plus last pulse offset HOF1
×
10000+HOF2 as the new origin.
+/-max.
cnt/rev
0