Maintenance
Description
item No.
3B1
1-3-34
U914 Switching between fax/copier modes
Description
Switches between fax and copier modes when the facsimile kit is installed to use the copier as a fax.
Purpose
To be set according to frequency of use: set to the more frequently used mode.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the mode (copier or fax) to be given priority using the cursor up/down keys.
2. Press the start key. The value is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
U992 Checking or clearing the printer/fax count
Description
Displays, clears or changes the print count of the printer or fax when the printer board or facsimile kit is
installed.
Purpose
To check the condition of use of the printer or fax.
Method
Press the start key. The print count of the printer or fax is displayed.
Setting
1. Select the count to be changed using the cursor up/down keys.
2. Enter a six-digit numerical value using the numeric keys. To clear both of the printer and fax counts, press
the reset key.
3. Press the start key. The count is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
To Next Page
Loading...
