Corghi Artiglio Master Code - Page 44

44 Artiglio Master Code User Manual
During extraction of the bottom bead accompany and hold the tyre in order to
prevent it from falling (Fig. 31o).
NOTICE
Once the tyre demounting phase is com-
pleted, direct it correctly in order to allow
re-entry of the tool head (Fig. 31o).
DANGER
Remove the tyre from the machine.
PHASE 5: Press the icon
(Fig. 31p) to
position the fixed tool and the bottom bead breaker in
the correct bottom bead mounting position (Fig. 31q) .
BALLOON
Top bead demounting.
During this operation ensure:
a. correct hooking of the bead during search for the
same (Fig. 31r).
b. Correct height positioning of the tool based on the
type of tyre to be demounted (Fig. 31s).
c. Correct positioning of the bead in the channel (Figs.
31t and 31u)
.
31o
31p
31q
31r