46 Artiglio Master Code User Manual
Demounting the bottom bead using the demounting
tool and bead breaker.
During this operation verify that the bottom bead is
correctly broken while the bottom disc and the tool
ascend (Fig. 31y)
.
Manually load the second bead on the tool.
NOTICE
PHASE 5: Press the icon (Fig. 31j).
The fixed tool and the bead breaker will go into posi-
tion to remove the bottom bead (Fig. 31k).
Wheel rotation and ascent of the bead breaker disc
activates automatically in order to complete extraction
of the bottom bead.
Where necessary, during the bead breaker
disc raising phase, hold the tyre up with your
hand (Fig. 31x).
NOTICE
31y
31j
31k
31x
To Next Page
Loading...
