Artiglio Master Code User Manual 47
UK
During extraction of the bottom bead accom-
pany and hold the tyre in order to prevent it
from falling (Fig. 31z).
NOTICE
Remove the tyre from the machine.
MOUNTING
Always check that the tyre/rim combination is correct in terms of compatibility
(tubeless tyre on tubeless rim; tube type tyre on tube type rim) and geometrical size
(keying diameter, cross-section width, off-set and shoulder profile) before mounting.
Also check that rims are not deformed, that their fixing holes have not become
oval, that they are not scaled or rusty and that they do not have sharp burrs on the
valve holes.
Check that the tyre is in good condition with no signs of damage.
WARNING
- Carefully lubricate the sides of the tyre along the entire
circumference of the bottom and top bead (Fig.32a)
.
31z
32a
To Next Page
Loading...
