Corghi Artiglio Master Code - Page 62

62 Artiglio Master Code User Manual
2- Operate the lever to fully lower the movable
tool below the bead seat (Fig. 40a).
To obtain a more precise position, press the button on
top of the lever
during movement (Fig. 40b).
3- Keep the button
pressed to hook the
bead (Fig. 40c).
Turn the wheel by pressing the rotation pedal
.
If necessary, operate the control to lower the head
further
.
4- Once the bead is hooked, release the button to return
the tool to the rest position (Fig. 40d).
5-
Lift the movable tool until the horizontal
line on the tool can be fully seen (Fig. 40e) - (A Fig. 40f).
6- Make sure the tyre underside is entirely broken, and if
not, repeat lower bead breaking.
7- Make sure the bead at 180° to the tool is in the rim
40a
40d
40e
40c
40b
40f
A