Corghi Artiglio Master Code - Page 77

Artiglio Master Code User Manual 77
UK
Use a USB key with a maximum 2 GB capacity.
If this does not work, request a key from the service network.
NOTICE
UPDATE TPMS
1. Insert the key with the updated software into
the USB socket of the MASTER CODE and wait 10
seconds.
2. Select UPDATE TPMS then press the confirm key
(Fig. 61).
The message in Fig. 61a will appear.
- If the update does not start after 10 attempts,
an error message will be displayed (Fig. 61b).
Press the confirm key
to go back to the
previous screen, then repeat the steps from
point 1.
- If the update starts, a progress message on new
file loading will be displayed (Fig. 61c).
- If file loading is interrupted, the message in Fig.
61d will be displayed.
In this case, press the confirm key
to
go back to the previous screen, then repeat the
steps from point 2.
- If the system cannot read the USB key, the mes-
sage in Fig. 61e will be displayed.
Press the confirm key
to go back to the
previous screen, then repeat the steps from
point 1.
61
61a
61b
61d
61e
61c