Configuration System Configuration
CubiScan 125 43
2. Tap CONFIGURE. Select the Other option if it is not already selected.
Update Firmware Tap this button to update the firmware.
The field below the button displays all firmware files that are saved on the
SD card. If you would like to update the CubiScan 125 to a certain firmware
file, select it in the list displayed and tap
[Update Firmware].
Reset Tap this button to reboot the system after updating the firmware. The
system must be rebooted each time the firmware is updated.
Date/Time This displays the current date and time.
Figure 38
Configure Other
To Next Page
Loading...
