CubiScan 125 - Figure 55 Fifth Sensor Calibration Screen; Figure 56 Sensor Calibration Complete

Calibration Calibrating the Ultrasound Sensors
CubiScan 125 57
platform (make certain the calibration cube is touching both side
panels), as shown below. Tap
[Next] to continue.
7. You have now finished calibrating the ultrasound sensors. Tap HOME to
return to the home screen or if you would like to try calibrating the
sensors again, tap
[Next].
Figure 55
Fifth Sensor Calibration Screen
Figure 56
Sensor Calibration Complete