Troubleshooting About
CubiScan 125 63
1. Is the CubiScan 125 turned on and securely connected to power?
2. Is the serial cable or Ethernet cable connected to both the CubiScan 125
and the computer or network, and are both connections secure?
3. (Computer connection) Is the serial cable connected to the computer at
either the COM1 or COM2 port?
4. (Computer connection) Is the Com Port in the Options dialog box
(Tools menu) configured for the correct port?
5. (Network connection) Is the CubiScan 125 properly configured for
TCP/IP communication? (Qbit software is used to configure the
CubiScan 125.)
6. Is there a problem with the CubiScan 125? Perform the Status function
in Qbit to check the status of the CubiScan 125.
7. Is there a problem with the computer or network? Refer to your
computer manual for information on troubleshooting the computer, or
contact your network administrator.
About
This section describes the About menu of the CubiScan 125. The About
menu contains useful information and records of the CubiScan 125.
Version
This section discusses the options available on the Version menu. Complete
the following steps to access the Version menu.
To Next Page
Loading...
