Need help?Do you have a question about the CubiScan 125 and is the answer not in the manual?
General| Brand | CubiScan |
|---|---|
| Model | 125 |
| Category | Measuring Instruments |
| Language | English |
Details warranty exclusions, limitations, and disclaimers of other warranties.
Explains how consumer protection laws interact with the warranty terms.
Details the technical specifications of the CubiScan 125, including power and environmental requirements.
Outlines measurement ranges, capacities, physical dimensions, and weight of the CubiScan 125.
Describes the CubiScan 125's touchscreen display and available output ports.
Details the process of unpacking the CubiScan 125 components from the shipping crate.
Offers guidance on the optimal environmental and physical placement of the CubiScan 125.
Guides the user through the assembly steps after unpacking, including sensor support and cable routing.
Details the process of attaching the top sensor support to the CubiScan 125.
Explains how to connect and route the height sensor cable to the CubiScan 125.
Provides step-by-step instructions for routing the height sensor cable correctly.
Covers the installation of the sensor cable cover for protection.
Instructs on how to remove all foam shipping supports and cable ties.
Details the procedure for placing the glass platform onto the CubiScan 125 frame.
Explains how to connect the AC power cord to the CubiScan 125.
Provides the steps for powering on the CubiScan 125 and initial self-checks.
Guides the user through connecting the CubiScan 125 to a computer via Ethernet, USB, or Serial.
Details the process of establishing an Ethernet connection, including driver installation.
Explains how to configure IP address and subnet mask for Ethernet connectivity.
Describes how to connect the CubiScan 125 to a PC using a USB cable.
Details the steps for installing the necessary USB driver for PC communication.
Provides instructions for connecting the CubiScan 125 using an RS-232 serial cable.
Guides the user on installing the optional Qbit software for operating the CubiScan 125.
Lists essential checks before operating the CubiScan 125 for the first time.
Outlines initial steps and precautions before starting operations with the CubiScan 125.
Explains how to use the touchscreen for configuration, control, and viewing measurement results.
Offers guidelines on how to properly clean and handle the CubiScan 125's touchscreen.
Describes the procedures for measuring and weighing objects using the CubiScan 125.
Refers to the Qbit User Guide for detailed instructions on cubing and weighing using the software.
Explains how to perform cubing and weighing directly using the CubiScan 125's touchscreen interface.
Details the information shown on the CubiScan 125 touchscreen during measurements.
Outlines the steps for measuring items using the CubiScan 125's ultrasound sensing technology.
Guides the user on measuring objects using the CubiScan 125's gate sensors.
Explains the procedure for zeroing the scale to ensure accurate weight readings.
Introduces the main configuration categories: Operation, Units, Ethernet, and Other.
Details the settings available within the Operation configuration menu.
Explains how to configure various operational settings like dim weight, scale, and ultrasound sensor enablement.
Guides on selecting measurement units (inches, cm, mm) and scale increment.
Details how to configure Ethernet settings, including IP address, subnet mask, and DHCP.
Covers miscellaneous settings available in the 'Other' menu, such as firmware updates and date/time.
Advises on preparations before starting calibration procedures.
Details the step-by-step process for calibrating the CubiScan 125's scale using test weights.
Guides the user through the calibration process for the CubiScan 125's measurement gate.
Explains how to recalibrate the touchscreen if selections become difficult.
Provides instructions for calibrating the CubiScan 125's ultrasound sensors using a calibration cube.
Outlines important precautions to follow during maintenance to prevent damage or issues.
Details the recommended procedure for cleaning the ultrasound sensors.
Explains how to clean the gate filters using a damp microfiber cloth.
Guides the user through the process of disconnecting and removing the CubiScan 125 controller.
Provides steps to take if the CubiScan 125 does not power on.
Offers solutions for when the CubiScan 125 scale provides inaccurate weight measurements.
Provides troubleshooting steps for incorrect length, width, or height measurements.
Explains common error messages related to computer communication and their resolution.
Describes the purpose and content of the About menu, including version details.
Details how to access and view the CubiScan 125 firmware and hardware version details.
Explains how to access and view the configuration audit trail history.
Details how to access and view the calibration audit history for the scale.
Guides on viewing diagnostic values for the CubiScan 125's scale.
Explains how to view diagnostic information for the CubiScan 125's measurement gate.
Guides on testing and viewing the calibration status of the CubiScan 125 touchscreen.
Details how to view diagnostic information for the CubiScan 125's left, right, and top sensors.
Guides on performing scale repeatability tests.
Explains how to run and view results for gate repeatability tests.
To Next Page
