4.5 Memory card insertion
To insert the memory card into the slot, proceed as follows:
3
Lift up the print head using the
opening slot (A) located on the cover
2
Remove the side cover by
rotating the lock/unlock.
4
Lift up the autocutter.
A
ATTENTION:
Do not touch the head heating line with bare hands or
metal objects.
Do not perform any operation inside the printer immedi-
ately after printing because the head and motor tend to
become very hot.
BUTTON IN
UNLOCKED POSITION
BUTTON IN
LOCKED POSITION
1
Disconnect the
power supply cable.
4. OPERATION
User manual KPM216HII ETH 37
To Next Page
Loading...
Need help?
General
