6.4 Cleaning
For periodic cleaning of the printer, see the instructions below
A
SENSORS
1
Disconnect the
power supply cable.
3
Lift up the print head using the
opening slot (A) located on the cover
2
Remove the side cover by
rotating the lock/unlock.
4
Lift up the autocutter.
ATTENTION:
Do not touch the head heating line with bare hands or
metal objects.
Do not perform any operation inside the printer immedi-
ately after printing because the head and motor tend to
become very hot.
BUTTON IN
UNLOCKED POSITION
BUTTON IN
LOCKED POSITION
6. MAINTENANCE
User manual KPM216HII ETH 55
To Next Page
Loading...
