Custom Audio Electronics KPM216HII-ETH - Character Specifi Cations in ESC;POS Emulation; Printer Dimensions

7.2 Character specifi cations in ESC/POS™ emulation
modelli a 200 dpi
Character set 3
Character density 11 cpi 15 cpi 20 cpi
Number of columns 88 123 160
Chars / sec 1760 2480 3200
Lines / sec 20 20 20
Characters (L x H mm)-Normal 2,25 x 3 1,625 x 3 1,25 x 3
modelli a 300 dpi
Character set 3
Character density 16 cpi 23 cpi 30 cpi
Number of columns 131 182 236
Chars / sec 3799 5278 6844
Lines / sec 29 29 29
Characters (L x H mm)-Normal 1,525 x 2,373 1,102 x 2,373 0,847 x 2,373
7.3 Printer dimensions
Length
horizontal paper out = 232 mm
vertical paper out = 208 mm
Height
horizontal paper out = 83 mm
vertical paper out = 107 mm
Width 274,5 mm
Weight 4800 g
NOTE:
Dimensions referred to devices without paper roll.
All the dimensions shown in following fi gures are in mm.
7. SPECIFICATIONS
68 KPM216HII ETH User manual