7 SPECIFICATIONS
7.1 Hardware specifi cations
GENERAL
Sensors
Head temperature, ‘Paper in presence’ sensor,
detector for black mark, ‘Paper out presence’ sensor,
‘Paper under the cutter’ sensor, ‘Printing head open’ sensor
external near paper end
Emulations ESC/POS
TM
, SVELTA
Printing driver
Windows XP, VISTA (32/64bit),
Windows 7 (32/64bit), Linux
INTERFACES
USB connector 12 Mbit/sec (USB 2.0 full speed)
RS232 serial connector from 1200 to 115200 bps
ETHERNET connector 10 Mbit/sec
MEMORIES
Receive buffer 64 Kbytes
Flash memory 16 Mbytes
RAM memory 32 Mbytes
Graphic memory Logos dynamic management (max 2MB graphic memory)
Memory Card SD/MMC 2 Gbytes (max. capacity)
PRINTER
Resolution
200 dpi models 203 dpi (8 dot/mm)
300 dpi models 304 dpi (12 dot/mm)
Printing method Thermal, fi xed head
Head life
(1)
100 Km / 100M pulses
Printing width 200 mm
Printing mode Normal, 90°, 180°, 270°
Printing format Height/Width from 1 to 8, bold, reverse, underlined, italic
Character fonts
ESC/POS™ emulation PC437, PC850, PC860, PC863, PC865, PC858 (euro), 2 TrueType font
(2)
ESC/POS™ emulation
(models with simplified chinese font)
PC437, PC850, PC860, PC863, PC865, PC858 (euro),
GB2312, 2 TrueType fonts
(2)
SVELTA emulation 20 embedded fonts and 2 TrueType fonts
(2)
7. SPECIFICATIONS
User manual KPM216HII ETH 65
To Next Page
Loading...
Need help?
General
