6 MAINTENANCE
6.1 Ejector paper jam
In case of paper jam proceed as follows:
A
1
Lift up the print head using the opening slot (A) located on the cover,
lift up the rollers cover
2
Remove the damaged paper from the ejector rollers and check the presence
for paper scraps inside the printer; carefully remove all scraps of paper. If necessary, use tweezers.
ATTENTION:
Do not touch the head heating line with
bare hands or metal objects.
Do not perform any operation inside the
printer immediately after printing because
the head and motor tend to become very
hot.
ATTENTION:
Do not let water or other liquids get inside the device.
Do not insert any kind of object inside the device.
6. MAINTENANCE
User manual KPM216HII ETH 49
To Next Page
Loading...
Need help?
General
