7.8 Character sets in SVELTA emulation
In SVELTA emulation the printer has 20 embedded fonts of varying width which may be accessed through control
characters (see commands description in SVELTA emulation of Command Reference). The following list shows the
font available and relative dimensions in dot:
• Font HEL8PT8
(A)
Proportional Font with fi xed height (H = 28 dot)
• Font HEL10PT8
(A)
Proportional Font with fi xed height (H = 34 dot)
• Font HEL14PT8
(A)
Proportional Font with fi xed height (H = 50 dot)
• Font HEL16PT8
(A)
Proportional Font with fi xed height (H = 55 dot)
• Font 18x24 (Font 18x24 in ESC/POS emulation)
• Font 14x24 (Font 14x24 in ESC/POS emulation)
• Font 10x24 (Font 10x24 in ESC/POS emulation)
• Font 8x12
(B)
Fixed Font
• Font 8x12-2
(B)
Fixed Font
• Font 12x12
(B)
Fixed Font
• Font 14x11
(B)
Fixed Font
• Font 16x24
(B)
Fixed Font
• Font 16x24_1
(B)
(C)
Fixed Font
• Font 16x24_2
(B)
(C)
Fixed Font
• Font 20x15
(B)
Fixed Font
• Font 28x20
(B)
Fixed Font
• Font 14x24_1
(B)
(C)
Fixed Font
• Font 16x24CN
(B)
(C)
Fixed Font
• Font OCRB (20x32)
(B)
Fixed Font
For further informations to characters representations print directly the Font Test
(D)
.
NOTES:
(A)
A proportional font is a font in which different characters have different pitches (widths).
(B)
A fi xed font is the opposite of a proportional font and is a fi xed-pitch font.
(C)
The fonts with the same name and dimension contain different characters in different positions from theirs.
(D)
During power-up, if the FORM FEED (FF) key is held down, the printer executes the FONT TEST.
In SVELTA emulation, it is possible to use TrueType fonts. True Type fonts are printable with every angle of rotation
and in bold, reverse, italic and underlined mode.
It is possible to address the TrueType font respects the UNICODE
TM
standard (see www.unicode.org), by using UTF-8
or UTF-16 encoding.
For the correct printing of the code tables, it is necessary that the selected TrueType font contains all the characters
in the tables. Otherwise, the ‘’ symbol will be printed instead the missing character.
7. SPECIFICATIONS
80 KPM216HII ETH User manual
To Next Page
Loading...
Need help?
General
