ELECTRICAL SPECIFICATIONS POWER SUPPLY cod. 964GE010000350 (OPTIONAL)
Power supply voltage from 100 Vac to 240 Vac
Frequence from 47 Hz to 63 Hz
Current (output) max. 9,6 A
Power 230W
ENVIRONMENTAL CONDITIONS
Operating temperature from 0°C to +50°C
Relative humidity from 10% Rh to 85% Rh
Storage temperature from -20 °C to +70 °C
Storage relative humidity from 10% Rh to 90% Rh
NOTES:
(1)
: Respecting the regular schedule of cleaning for the device components.
(2)
: “Veramono.ttf” and “Vera.ttf” are installed on printer fl ash disk. It is possible to install additional TrueType fonts
(see par.12.8).
(3)
: Referred to a standard CUSTOM receipt (L=10cm, Density = 12,5% dots on).
(4)
: For external rolls diameter higher to Ø100mm it’s recommended to use a paper pretensioning device.
(6)
: If the “Short Ticket” parameter is enabled (see the paragraph 5.4), it’s possible to reach the minimum length of
110 mm.
7. SPECIFICATIONS
User manual KPM216HII ETH 67
To Next Page
Loading...
