Command Line Interface 63
Commands
To view the system help message for all commands, type:
pm>help
Available commands:
cycle deluser factory_defaults
interval list lock
help name off
on passwd reboot
restore save status
syslog temperature ver
unassign unlock whoami
buzzer current currentprotection
adduser alarm assign
id
NOTE: To get detailed help on the commands listed
above type
'<command> help';
NOTE: Some commands accept as input a data type
called
<outletString>. <outletString> is a string
representing
one or more outlets. This string can be:
- one single outlet.
Examples: on 3 (turn on outlet 3);
off router (turn off the outlet
called
router).
- a group of outlets.
Examples: status 1,3,5 (get status of outlets
1,
3 and 5);
cycle 2-7 (cycle the outlets 2, 3, 4,
5, 6, 7)
lock 2,5-7 (lock the outlets 2, 5, 6
and 7).
To Next Page
Loading...