4 Web-based Switch Configuration D-Link Smart Managed Switch User Manual
1
1
0
0
7
7
• To define the IPv4 ACL IGMP Rule: Select IPv4 ACL and click Next button. Select the Protocol
Type to IGMP, the updates to show the follows:
Figure 4.136 - Add Access Rule – IPv4 IGMP
IGMP Type (0-255): Sets the IGMP Type field as an essential field to match.
Click Next button then the ACL profile is added.
• To define the IPv4 ACL TCP Rule: Select IPv4 ACL and click Next button. Select the Protocol Type
to TCP, the updates to show the follows:
To Next Page
Loading...
