D-Link DGS-1210 Series User Manual

6 Command Line Interface D-Link Smart Managed Switch User Manual
1
1
4
4
7
7
Command Parameter
reset config
show boot_file
show firmware
information
show flash
information
show ipif [<ipif_name>]
show switch
show route {ipv4 | ipv6}
config account admin password <passwd>
save [config config_id <integer (1-2)>]
debug info
Each command is listed in detail, as follows:
?
Purpose To display a list of commands.
Syntax ?
Description The ? command displays a list of commands of the switch.
Parameters None.
Restrictions None.
Example usage:
To display a list of commands of the switch:
DGS-1210-52MP login: admin
Password:
DGS-1210-52MP> ?
USEREXEC commands :
config account admin password <passwd>
config configuration config_id <integer (1-2)> {delete | boot_up }
config firmware image_id <integer (1-2)> boot_up
config ipif <ipif_name> { ipaddress <ip-address> <subnet-mask> gateway <gw-add
ress> | dhcp | bootp }
config ipif <ipif_name> { ipv6 ipv6address <ipv6networkaddr> | dhcpv6_client {
enable | disable}}
debug info
download {firmware_fromTFTP {<ipaddr>| <ipv6addr>} <path_filename (64)> | cfg_
fromTFTP {<ipaddr>| <ipv6addr>} <path_filename (64)> config_id <integer (1-2)>}
logout
ping <ip_addr>

D-Link DGS-1210 Series Specifications

General

Model	DGS-1210 Series
Uplink Ports	2/4 (varies by model)
VLAN Support	Yes
QoS	Yes
Management	Web-based
Dimensions	Varies depending on the model
Weight	Varies depending on the model
Operating Temperature	0°C to 45 °C
Power Consumption	Varies depending on the model
Certifications	CE, FCC, RoHS
Port Count	24, 48 (varies by model)
Gigabit Ethernet Ports	24, 48 (varies by model)
PoE Support	Available on some models (DGS-1210-28P, DGS-1210-52P, etc.)
Jumbo Frame Support	Yes, up to 9, 216 Bytes
Storage Temperature	-40°C to 70°C