D-Link DGS-1210 Series - Page 24

1 Product Introduction D-Link Smart Managed Switch User Manual
1
1
7
7
Fan Error
(For DGS-1210-
28P/28MP/52MP)
Red Solid light
The fan has runtime failure and is
brought offline.
PoE Max.
(For DGS-1210-
10P/10MP/28P/28MP/52MP)
Amber
Solid light
The PoE Max LED lights up when
the total PoE output of Switch
reached or exceeded
65 Watts for
DGS-1210-10P, 130 Watts for
DGS-1210-10MP, 193 Watts for
DGS-1210-28P, and 370 Watts
for DGS-1210-28MP/52MP.
In the
meantime, no additional PoE
device can be supported.
Blinking
Amber
Total PoE output of Switch
reached guard band mode. (Max.
PoE budget < 7 Watts )
Light off
When the system power usage
does not reach the guard band
range.
LED Per
10/100/1000
Mbps
Copper Port
Link/Act
Green/Amber
Solid
Green
When there is a secure 1000Mbps
Ethernet connection (or link) at
any of the ports.
Blinking
Green
When there is reception or
transmission (i.e. Activity—Act) of
data occurring at a 1000Mbps
Ethernet connected port.
Solid
Amber
When there is a secure
10/100Mbps Ethernet connection
(or link) at any of the ports.
Blinking
Amber
When there is reception or
transmission (i.e. Activity—Act) of
data occurring at a 10/100Mbps
Ethernet connected port.
Light off No link.
PoE Mode
Green
Solid Light Power feeding.
Amber Solid Light Error Condition.
Off Solid Off No Power feeding.
LED Per
100/1000Mbps
SFP Port
Link/Act
Green/Amber
Solid
Green
When there is a secure 1000Mbps
Ethernet connection (or link) at
any of the ports.
Blinking
Green
When there is reception or
transmission (i.e. Activity—Act) of
data occurring at a 1000Mbps
Ethernet connected port.
Solid
Amber
When there is a secure 100Mbps
Ethernet connection (or link) at
any of the ports.
Blinking
Amber
When there is reception or
transmission (i.e. Activity—Act) of
data occurring at a 100Mbps
Ethernet connected port.
Off Solid off No link.