4 Web-based Switch Configuration D-Link Smart Managed Switch User Manual
82
Figure 4.96 – L3 Functions > IPv6 Interface Settings - Edit
IPv4 Address: Specifies the IPv4 address for the interface.
Netmask: Select the netmask of IP address.
Admin State: Enables or disables the interface administration state.
Click the Apply button to implement changes made.
Click the IPv6 button to configure the IPv6 interface settings:
Figure 4.97 – L3 Functions > IPv6 Interface Settings – IPv6
IPv6 System Settings:
Interface Name: Displays the interface name of IPv6.
IPv6 State: Specifies the IPv6 to be enabled or disabled.
Interface Admin State: Displays the interface admin status.
DHCPv6 Client: Specifies the DHCPv6 client to be enabled or disabled.
IPv6 Network Address: Specifies the IPv6 Network Address.
NS Retransmit Time Settings:
NS Retransmit Time (1-3600): Enter the Neighbor solicitation’s retransmit timer in second here. Specifies
the NS retransmit time for IPv6. The field range is 1-3600, and default is 1 second.
Automatic Link Local State Settings:
Automatic Link Local Address: Specifies the automatic link is enabled or disabled.
Click the Apply button to implement changes made.
To Next Page
Loading...
