xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
3
Web Pages
When connecting to the management mode of the Switch with a Web browser, a login screen is displayed. Enter a user name and
password to access the Switch's management mode.
Below is a list of the folders and windows available in the Web interface:
Configuration – C ontains the following main folders, windows, and related windows: System Information, Serial Port Settings,
IP Address, IPv6 Interface Settings, IPv6 Route Table, IPv6 Neighbor Settings, Port Configuration, Port Settings, Port Description,
Port Error Disabled, Static ARP Setting s, User Accounts, Syst em Lo g Con figuration, System Lo g Settings, System Lo g Ho st,
System Severity Settings, DHCP/BOOTP Relay, DHCP/BOOTP Relay Global Settings, DHCP/BOOTP Relay Interface Settings,
DHCP L ocal Relay Set tings, DHC P A uto Configuration Settings, M AC Ad dress A ging Ti me, W eb Set tings, Tel net Set tings,
Password En cryption, CLI Pag ing Setting s, Firmware Information, Power Sav ing Settin gs, Dual Configuration Settings, SMTP
Settings, Ping Test, SNTP Settings, Time Settin gs, Time Zo ne Setting s, M AC Notification Settin gs, MAC No tification Gl obal
Settings, MAC Notification Port Settings, SNMP Settings, SNMP Global State Settings, SNMP Linkchange Trap Settings, SNMP
View Table, SNMP Group Table, SNMP User Table, SNMP Community Table, SNMP Host Table, SNMP v6Host Table, SNMP
Engine ID, SNMP Trap C onfiguration, R MON, CPU Filter L3 Con trol Pack et Settings, Single IP Man agement, and Single IP
Settings, Topology, Firmware Upgrade, Configuration File Backup/Restore, Upload Log File, and SD Card FS Settings.
L2 Features – Contains the following main folders, windows, and related windows: Jumbo Frame, Egress Filter Settings, 802.1Q
VLAN, Priv ate VLAN Settin gs, 802.1v Protocol VLAN, 802 .1v Pro tocol Gro up Settings, 802 .1v Protocol VLAN Setting s,
MAC-based VLAN Settin gs, GVR P Setting s, PVID Au to Assign Settings, Po rt Tru nking, VLAN Trunk Setting s, LACP Po rt
Settings, Traffic Segmentation, IGMP Snooping, IGMP Snooping Settings, Data Driven Learning Settings, ISM VLAN Settings,
ISM Pro file Settin gs, IP Multicast Pro file Settings, Limited Multicast Add ress Range Settin gs, Max M ulticast Gro up Settin gs,
MLD Snooping Settings, P ort M irroring, L oopback Detection Settings, Spanning T ree, ST P Bridge Global Set tings, S TP Port
Settings, MST Co nfiguration Id entification, STP In stance Setti ngs, MSTP Port In formation, Forward ing & Filterin g, Unicast
Forwarding, Multicast Forwarding, and Multicast Filtering Mode.
QoS – Contains the following main folders, windows, and related windows: Bandwidth Control, Traffic Control, 802.1p Default
Priority, 802.1p User Priority, and QoS Scheduling Mechanism.
Security – Contains the following main folders, windows, and related windows: Safeguard Engine, Trusted Host, IP-MAC-Port
Binding (IMPB), IMPB Global Settings, IMPB Port Settings, IMPB Entry Settings, DHCP Snooping Entries, MAC Blocked List,
Port Security, Port Security Settings, Port Lo ck Entries, DHCP Server Screening, DHCP Screening Port Settings , DHCP Offer
Filtering, 802 .1X, 802.1X Settings, 802 .1X User, Au thentic RADIUS Serv er, Gu est VLAN, SSL Settin gs, SSH, SSH
Configuration, SSH Authmode an d Al gorithm Settin gs, SSH Us er Authentication Mode, Acce ss Au thentication Con trol,
Authentication Policy and Parameter Settings, Application Authentication Settings, Authentication Server Group, Authentication
Server Host, Login Method Lists, Enable Method Lists, Configure Local Enable Password, Enable Admin, MAC-based Access
Control (M AC), MAC Settings, M AC Lo cal Settin gs, Web-based Access Con trol (WAC), WAC Gl obal Setting s, WAC User
Settings, WAC Port Settings, Japanese Web-based Access Control (JWAC), JWAC Global Settings, JWAC Port Settings, JWAC
User Settings, JWAC Customize Page Language, JWAC C ustomize Page, Multiple Authentication, Authorization Network State
Settings, Multiple Authentication Settings, Guest VLAN, IGMP Access Control Settings, and ARP Spoofing Prevention Settings.
ACL – Contains the following m ain folders, windows, and related windows: Access Configuration Wizard, Access Profile List,
CPU Access Profile List, and Time Range Settings.
Monitoring – Contains the following main folders, windows, and related windows: Device Environment, Cable Diagnostics, CPU
Utilization, Port Utilization, Packet Size, Packets, Received (RX), UMB_cast (R X), Transmitted (TX), Errors, Received (R X),
Transmitted (TX), Port Access Con trol, RADIUS Authentication, RADIUS Acc ount Client, Authenticator State, Authenticator
Statistics, Authenticator Session Statistics, Au thenticator Diagnostics, Browse ARP Table, Browse VLAN, Browse Router Port,
Browse MLD Router Port, Browse Session Table, IGMP Snooping Group, MLD Snooping Group, WAC Authenticating St ate,
JWAC Host Table, MAC Address Table, System Log, and MAC Authentication State.
Save – Contains links for Save Configuration, Save Log, and Save All.
Tools – Contains the following windows: Download Configuration File to NV-RAM, Download Configuration File to SD Card,
Download Fir mware to NV- RAM, Download Firm ware to SD Ca rd, Up load Con figuration File to TFTP, Upload Lo g File to
TFTP, Reset, and Reboot System.
To Next Page
Loading...
Need help?
General
