D-Link xStack DGS-3200-10 - Save Log; Save All

xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Save Configuration
Open th e Save d rop-down menu on t he left-hand si de o f t he m enu ba r at t he t op of t he Web m anager an d cl ick Save
Configuration to open the following window:
Figure 8 - 1. Save Configuration window (DGS-3200-10 and DGS-3200-16)
Use the drop-down menu to choose a configuration file indexed as ID 1 or 2 and then click Apply.
Figure 8 - 2. Save Configuration window (DGS-3200-24)
Use the drop-down menu to choose a configuration file indexed as ID 1, 2, or Active, select a Storage Media as a destination (SD
Card or NV-RAM, enter a File Path, and then click Apply.
Save Log
Open the Save drop-down menu on the left-hand side of the menu bar at the top of the Web manager and click Save Log to open
the following window:
Figure 8 - 3. Save Log window (DGS-3200-10 and DGS-3200-16)
To save the current log to NV-RAM, click Apply.
Figure 8 - 4. Save Log window (DGS-3200-24)
To save the current log, select a Storage Media as a destination (SD Card or NV-RAM, enter a File Path, and then click Apply.
251