xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Reboot System
The following window is used to restart the Switch.
Open the Tools drop-down menu on the left-hand side of the menu bar at the top of the Web manager and click Reboot System to
open the following window:
Figure 8 - 17. Reboot System window
Clicking the Yes radio button will instruct the Switch to save the current configuration to non-volatile RAM before restarting the
Switch. Clicking the No radio button instructs the Switch not to save the current configuration before restarting the Switch. All of
the configuration information entered from the last time either Save Configuration or Save All was executed will be lost.
Click the Reboot button to restart the Switch.
256
To Next Page
Loading...
