D-Link xStack DGS-3200-10 - Menu Bar

xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
57
 Add to group – Add a candidate to a group. Clicking this option will reveal the following dialog box for the user to enter a
password for au thentication fro m the Candidate Switch befo re being ad ded to th e SI M group. Click OK t o enter th e
password or Cancel to exit the dialog box.
Figure 2 - 63. Input password dialog box
 Property – To pop up a window to display the device information.
Menu Bar
The Single IP Management window contains a menu bar for device configurations, as seen below.
Figure 2 - 64. Menu Bar of the Topology View
The five menus on the menu bar are as follows.
File
 Print Setup – Will view the image to be printed.
 Print Topology – Will print the topology map.
 Preference – Will set display properties, such as polling interval, and the views to open at SIM startup.
Group
 Add to group – Add a candidate to a group. Clicking this option will reveal the following dialog box for the user to enter a
password for au thentication fro m the Candidate Switch befo re being ad ded to th e SI M group. Click OK t o enter th e
password or Cancel to exit the dialog box.
Figure 2 - 65. Input password dialog box
 Remove from Group – Remove an MS from the group.
Device
 Configure – Will open the Web manager for the specific device.
View
 Refresh – Update the views with the latest status.
 Topology – Display the Topology view.
Help
 About – Will display the SIM information, including the current SIM version.